AIR REPAIR™ A/C Evaporator Treatment... Here is HOW and WHY it works! |
| Here is a look at a diagram of a typical air conditioned vehicles AIR DISTRIBUTION System. This is known as a "Series Reheat" system because all air entering the passenger compartment first must pass over the evaporator. The TEMPERATURE BLEND DOOR controls the in car temperature by directing the air into the passenger compartment or over the heater, or a blend of both. |
 |
| Why does the AIR REPAIR A/C Evaporator TREATMENT Work? It works because
the special application hose allows you to apply the triple action foaming
formula directly to the AIR INLET SIDE of the evaporator. That's where the
odor problems starts. Because all air entering the passenger compartment
MUST pass over the evaporator, the AIR INLET SIDE of the evaporator
is exposed to all the pollutants in the air. With AIR REPAIR Evaporator TREATMENT, you get right to the source of the problem. Application is completed with the long hose and nozzle that is easily inserted into the evaporator case. The multi-directional brass spray nozzle assures complete coverage of the evaporator. Simply apply the contents of one can, allow the vehicle to sit for about 10 minutes. Following the application, start the car with the fan motor on high, and the vehicle a/c system is back in service. It's just that simple. You can purchase this product now!. |
 |
|
|
|
|
|
|
|
|
|
