The new Universal Hose Repair Kits use the Crimpmate™ 3 Step Hose repair system to make professional, OE type hose crimps on any hose assembly while re-using the original tube ends or fittings. So regardless if you are a larger shop and you require the Crimpmate™ Hose Repair Assortment or you just need the parts and hose for a single repair, the Crimpmate™ 3 Step Repair Process will assure you leak free crimps every time!

The 3 Step Hose Repair from Crimpmate™

Step 1
Cut the original ferrule, remove and discard. Remove hose and clean barb making sure there are no rough edges.

Step 2
Now install the replacement ferrule supplied with the kit. Install the proper retainer ring from the assortment (supplied).

Step 3
Slide the replacement hose onto the bard end of the existing tube or fitting. Slide ferrule over the hose. Be sure that hose is installed all the way up the barb.

Re-crimp
Re-crimp the replacement ferrule and you're done! That's it! Now the hose is replaced and recrimped to OE appearance and specifications.

Here's a close up look at an actual Crimpmate™ Hose Repair

Buy Now!
See more products from Keep-it-Kool.com

© Copyright 2000-2005; Mobilair 2000; All Rights Reserved